Wednesday, November 19, 2014

2 PCS. LENOVO IDEAPAD K1 BOOTLOGO ONLY and TOO MANY PATTERN ATTEMPT, FULL PROCEDURE HERE

Good day to all!!..

I have here 2 pcs Lenovo Ideapad K1,
1 is TMPA and the other 1 is Boot Logo Hang-up Only.
Done with the same Procedure..
Flash with ZOOM rom.





Things Needed: (Drivers, Files, Images and Procedures in 1 pack)
1. Original Lenovo Ideapad K1 USB Cable
2. Firmware and drivers
3. Battery Must be at least 70% Charged
4. Windows 7 x86(32).. 


Procedure.
1. Turn-off K1.
2. Enter APX MODE
~HOld Volume up + Volume Down + Power Button
~You may notify APX MODE if you see two LED lights Lit beside of HOME Button.



3. Insert USB Cable from PC to K1
4. Right Click MY COMPUTER,
5. Select Manage
6. Click Device Manager
7. Locate APX with Yellow Exclamation Sign in OTHER DEVICES

8. Update driver and Browse to DRIVER FOLDER inside of the file you Downloaded
9. A Windows Driver Installation may Prompt you to install/update.

10. Go to K1 FILES Folder and Locate "Flash-win.bat"
11. Right Click "Flash-win.bat" and select run as Admin.

12. Just wait for Flash-win.bat CMD to Disappear, meaning you're done! Congrats!

NOTE: If Flash-win.bat Hangs-up. Just Repaet the procedure 1 to 11.

Be adviced that this procedures are tested by me but Do it at your own Risk.
Be adviced that this procedures are tested by me but Do it at your own Risk.
Be adviced that this procedures are tested by me but Do it at your own Risk.





Best Regard.. TAMARAW8